[QPST] How To Flash Lenovo Devices Based On Qualcomm Using QFIL

[QPST] How To Flash Lenovo Devices Based On Qualcomm Using QFIL

• We set vcredist_x86.exe , which go in the complete set with "proshivalschikom" itself;
• set himself "flasher" - QPST.2.7.422.msi ;
• install drivers for the Qualcomm chips - they are in the archive Qualcomm_USB_Drivers.7z

Completely turn off your device , and then we press the volume up button (Volume Up), and holding it connect the USB-cable which is already connected to the USB 2.0 port of your PC - in the Device Manager, you should see the device Qualcomm Lenovo HS-USB QDLoader 9008

Directly installing firmware !

In the Programmer patch specify the path to the file prog_emmc_firehose_89XX.mbn (in my case prog_emmc_firehose_8916.mbn), for this click on Knop «the Browse» , in the window that opens, specify the path to the folder with the firmware (in my case ROW_S121), then choose the file prog_emmc_firehose_89XX .mbn and click "Open" .
then click on digging "the Load the XML ..." , alternately choose in the window that opens - first rawprogram0.xml and click "Open", and then patch0.xml and also click "Open".

PS And a few more wishes and parting words:

Open the Device Manager on your PC, then turn off the device (smartphone or tablet) and take out the USB-cable from the device (if it was connected).
The device should restart at the successful process of filling the firmware and boot into Android OS.

• If you do not have the strength to even install the drivers for the Qualcomm chip, the probability of a successful firmware casting process is reduced to 3%.
• I advise you to make a fill flash with a PC that is running Windows 7 (in Windows 8.1, but the likelihood of a successful firmware casting process is reduced to 30%).
• In general, this method firmware process is safe, but only in the right hands!
• Good luck to all!

Download:
QPST.2.7.422.7z
Qualcomm_USB_Driver_2.1.0.5
Qualcomm_USB_Drivers.7z